SCALE INHIBITOR
KRAFT PULPING
ATOSCALE HIB is a semi-viscous liquid crystal modifier engineered
to prevent the formation of various scales (i.e. calcium carbonate,
calcium oxalate and others), in batch and continuous digesters. When
ATOSCALE HIB is used on a continual basis, acid de-scaling is
reduced or no longer necessary. For best results, ATOSCALE HIB must
be used non-stop. If the system runs short of ATOSCALE HIB, scale
and rust will start to form immediately. ATOSCALE HIB will not
remove existing scale, but will prevent the formation of additional
scale.
ATOSCALE HIB PLUS is a semi-viscous liquid, specially formulated to
reduce, prevent or eliminate various types of scale in batch and
continuous digester and evaporator systems.
ATOSCALE HIB PLUS is
designed to sequester various salts (such as carbonates and sulfates
of sodium, calcium, barium and potassium), hold them in solution
and/or suspension, and disperse them into the system, preventing
deposition on the heat transfer tube and other surfaces.
ATOSCALE HIB PLUS also sequesters metal ions such as iron, manganese, and
magnesium.
ATOSCALE HIB PLUS will not remove existing scale, but
will prevent the formation of additional scale in the system. When
ATOSCALE HIB PLUS is used on a continuous basis, the following
benefits can be expected:
1. High sequestration: The ability to complex metal ions at
stoichiometric concentration.
2. Hydrolytic stability: Resists decomposition in aqueous solutions
even at elevated temperatures and pH extremes.
3. Crystal growth modification: Prevents hard scale deposition.
4. Elimination of costly acid cleaning.
5. Enormous reduction in downtime.
6. Reduction in steam consumption.
7. Cost effective.
MECHANICAL PULPING
ATO KALINHIB is a semi-viscous liquid engineered to
prevent the formation of diverse scale (especially calcium oxalate)
in the evaporator system of ammonium sulfite mills (red liquor).
When ATO KALINHIB used on a continual basis, acid de-scaling of the system
will be reduced or eliminated. For best results, ATO KALINHIB must
be used on a non-stop basis. If the system runs short of ATO KALINHIB, scale will start to form immediately. ATO KALINHIB will
not remove existing scale, but will prevent the formation of
additional scale. Boil out or de-scaling the system with our product
ATO IBB (scale and sludge remover) prior to the injection of ATO KALINHIB is recommended.
ATO COMPLEX is a unique liquid blend of chemicals designed to
prevent scale formation and to lubricate the cutting edge of refiner
disks in thermo-mechanical pulp systems.
ATO COMPLEX prevents
mineral salts from forming, thus reducing friction to a minimum,
which in turn dramatically increases the life of the refiner disks.
To be most effective,
ATO COMPLEX must be used on a continuous
basis.
