ATO TRAK
BIODEGRADABLE HARD SURFACE CLEANER AND BIOSTIMULANT
DESCRIPTION
ATO TRAK is a proprietary blend of bacterial spores, concentrated biodegradable surfactants and biostimulating agents. The components in ATO TRAK are listed on the Canadian Domestic Substances List (DSL). ATO TRAK is quick acting and effective in removing surface stains resulting from spilled petroleum products on concrete, asphalt, and other hard surfaces. Used alone or in conjunction with BioSaniTERRA Biologicals’ other bioremediation products, ATO TRAK shortens clean-up times, increases contaminant bioavailability and initiates biodegradation.
Features
• Inoculates contaminations with bacteria
• Cleans surfaces of oil spills and stains
• Cleans oily equipment, vehicles and tools
• Contains no petroleum distillates or solvents
• Contains essential microbial nutrients
Directions for Use
ATO TRAK can be diluted 1:2 (1 part ATO TRAK to 1 part water) for heavier loads and stains. Dilute 1:4 (1 part ATO TRAK to 3 parts water) for lighter applications.
• Hard Surface Cleaning - concrete, asphalt: Dampen the contaminated surface, apply ATO TRAK and allow it to work for 20-30 minutes. Keep the worksite damp during treatment and repeat as necessary.
• Recommended Application Equipment: ATO TRAK cleans petroleum based materials from nearly all surfaces regardless of the application.
• General Equipment Cleaning: Do not pre-wet surfaces or use in direct sunlight on painted surfaces. A 1:3 (1 part ATO TRAK to 2 parts water) dilution is recommended for most applications with a maximum recommended dilution of 1:5 (1 part ATO TRAK to 4 parts water).
• Pressure Washing/Degreasing: Pressure blast heavy materials. Spray surface with a 50/50 solution and pressure wash again from bottom up. Do not allow surfaces to dry.
Product Characteristics
| Cell count | 7.6 billion/gallon |
| pH | 10.4 - 10.7 |
| Percent volatile | 0 |
| Soluability in water | 99% |
| Boiling Point | >100° C |
| Flash Point | Non-flammable |
| Appearance | Cream to white liquid |
| Odor | Floral perfumed |
Storage and Handling
Store in a cool, dry place. Avoid excessive inhalation. Wash hands thoroughly with warm, soapy water after handling. Avoid eye contact. Wear protective clothing (rubber gloves, eye protection, etc.). Pre-test new equipment finishes by applying to a small area first in the shade. Best results are seen when applied to damp concrete surfaces.
Available Packaging
• 5 gallon pail
• 55 gallon drum
• 4 x 1 gallon unit cases
